Full-view glass
Raised-panel steel
Carriage house
Modern flush
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Broadview Park?
Garage door work in Broadview Park typically runs $150 – $600 for most repairs, while a brand-new door installation usually falls between $700 and $2,200. Spring repair alone is $180 – $340 for a single spring, and a matched pair is replaced together, so it costs about twice that. Every price here is a typical estimate for the Broadview Park market; the written estimate we give you sets the final price.
Broadview Park is a small, tight-knit community just west of Fort Lauderdale, and most of the homes here have a driveway-facing garage the household depends on every single day. When a door won’t close or a spring lets go, the whole routine stops. We handle the repair, opener work, springs, and full installation, and we work on your brand: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Call (877) 685-2138. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most garage door repairs in Broadview Park land between $150 and $600.
- A single spring runs $180 – $340; a matched pair costs about double.
- New door installation is $700 – $2,200 depending on size, material, and style.
- Free estimates, upfront pricing, and same-day service on most jobs.
- Our technicians have up to 11 years of experience across the eight major brands.
Garage Door Cost Breakdown (2026)
Here’s how the numbers shake out for Broadview Park in 2026. These are typical estimated ranges, not a quote for your specific door. The written estimate is what you pay.
| Service | Typical Estimated Cost | What It Covers |
|---|---|---|
| Garage Door Repair (general) | $150 – $600 | Diagnosis and fix of the failing part; most common jobs sit in this band |
| Spring Repair (one spring) | $180 – $340 | Torsion or extension spring replacement for a single spring |
| Cable Repair | $130 – $250 | Lift cable replacement and re-tensioning |
| Opener Repair | $120 – $320 | Motor, logic board, sensor, remote, or gear fix |
| Opener Installation | $250 – $550 | New opener, safety sensors, and rail setup |
| Panel Replacement | $250 – $500 | Replacing one or more damaged door sections |
| Track Realignment | $120 – $240 | Straightening and re-anchoring bent or shifted tracks |
| Roller Replacement | $110 – $220 | New rollers for smoother, quieter travel |
| New Door Installation | $700 – $2,200 | Full door, hardware, and haul-away, depending on size and material |
What pushes a job toward the top of a range? Door size is the biggest factor on installation. A single-car door and a double-car door are different animals. Material matters too: a basic steel door sits at the low end, while a heavier insulated or wood-look door with windows climbs toward $2,200. On repairs, the number of parts involved and whether the door is a torsion-spring design or an older extension-spring setup both move the number. We give you a written estimate before any work starts, so you know the price on paper.
What Affects Garage Door Pricing in Broadview Park
Two houses on the same street can get very different numbers, and it’s rarely about the neighborhood. Here’s what actually moves the price.
- Door type and spring system. Torsion springs are the modern standard and sit at the higher end of the spring range. Older extension-spring doors are often simpler to work on. Either way, a matched pair doubles the single-spring price because both springs are replaced together.
- Brand and parts availability. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so we’re not blindly guessing at parts. If your opener is a brand outside that list, we’ll tell you honestly before we start.
- Age of the door and hardware. A door that’s been sitting through South Florida’s humid summers for years often needs rollers, cables, and springs at the same time. Fixing one part on a tired door is a quick fix; fixing the whole system is the right fix, and the estimate shows you both.
- Single vs. double car door. More door means more material, more springs, and a stronger opener. This is the single biggest swing on installation cost.
- Opener type. A basic chain-drive opener is the least expensive to install. Belt-drive and smart openers run higher within the $250 – $550 range.
- Whether it’s an emergency. A door that won’t close leaves your home open, so we treat it as urgent. Same-day service is available, and the price is still set per job by the written estimate. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Spring Repair: The Most Common Call in Broadview Park
Springs are the number one reason a garage door stops working, and they’re also the most dangerous part of the system. A torsion spring under load holds enough tension to cause serious injury if it’s handled without the right tools and training. When a spring snaps, you’ll usually hear a loud bang and find the door suddenly too heavy to lift. This isn’t a job for a homeowner with a wrench; it’s a job for a trained technician.
Spring repair in Broadview Park is $180 – $340 for one spring. Because springs wear at the same rate, a matched pair is almost always replaced together, so budget about twice that for a pair. We stock the common sizes and can usually get you back up and running the same day. If you’re hearing a bang or the door won’t lift, call (877) 685-2138 for a free estimate.
Repair or Replace? How to Decide
It’s cheaper to repair a door that has one failed part and otherwise solid panels and tracks. It’s usually cheaper over time to replace a door that’s rusting, dented in several panels, or on an older spring system that keeps failing. A rough rule: if the repair cost is a large share of the $700 – $2,200 installation range, replacement starts to make sense.
A few things point toward replacement: multiple dented or rusted panels where panel replacement ($250 – $500) would add up past a new door, a door that’s out of square, or one that’s just not securing your home the way it should. A few things point toward repair: a single bad spring, a noisy door that just needs rollers ($110 – $220), or an opener that’s failing while the door itself is fine ($120 – $320). We’ll tell you which one makes sense for your door, and we won’t push a replacement when a repair will do the job.
How to Save on Garage Door Work
The best savings come from catching problems before they compound. Small things get expensive when they’re ignored.
- Fix the small stuff early. A squeaky roller replaced now is $110 – $220. Add a snapped cable and a bent track to the list and the job grows fast. Routine attention keeps the number down.
- Replace springs as a pair. If one spring just failed and the other is the same age, replacing both now saves you a second service call and a second labor charge when the other lets go.
- Lubricate and inspect. A minute with the right lubricant on the hinges, rollers, and tracks a couple times a year keeps the door running smoother and slows wear.
- Don’t skip the estimate. Get the written estimate before work starts. It’s free, and it locks in the price on paper so there are no surprises when the job is done.
- Match the opener to the door. An undersized opener works harder and wears out faster. Right-sizing it during installation saves you a replacement a few years down the road.
- Ask about both options. When a repair competes with a replacement, ask for both figures. Comparing the numbers side by side is the clearest way to decide.
Free estimates are part of how we work. Call (877) 685-2138 and we’ll get a technician out to look at your door and put the number in writing.
Opener Repair and Installation in Broadview Park
Opener problems range from a remote that won’t sync to a motor that’s grinding or a safety sensor that keeps tripping. Opener repair runs $120 – $320, and it covers the common failures: logic boards, gear sets, remotes, wall switches, and safety sensors. If the opener itself is past saving, a new opener installs for $250 – $550, including the sensors and rail.
We service LiftMaster, Chamberlain, Genie, and Craftsman openers, and they’re the most common brands in Broadview Park garages. A few things make an opener fail faster: a door that’s out of balance, worn rollers, or a spring that’s gone weak. When we fix an opener, we also check the door balance, because a struggling door is often the real reason the opener gave out. The right fix now saves you from a second breakdown later.
New Garage Door Installation in Broadview Park
A new door is the biggest ticket on the list, at $700 – $2,200. That range covers a full door with hardware, springs, and haul-away of the old one. Where you land depends on size, material, and style. A single-car steel door without windows sits near the bottom. A double-car insulated door with glass panels and a decorative hardware package sits near the top.
Installation is also a good time to think about the opener and the spring system together. A new door paired with a right-sized opener and a fresh set of torsion springs gets you a system that runs quietly and lasts. If you’re weighing a new door against another round of repairs, we’ll walk you through the numbers so the choice is clear. Call (877) 685-2138 for a free estimate on a new door.
Why Broadview Park Homeowners Call Us
We’re a residential garage door specialist, not a general handyman splitting attention across a dozen trades. That focus is why we can work on your specific brand: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. When your door won’t close and your home is sitting open, that focus matters. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, so we’re back up and running as quickly as possible.
Our technicians have up to 11 years of experience, and every job starts with a written estimate and ends with a check that the door opens and closes the way it should. We’re not the cheapest option, and we don’t try to be. The right fix, not just a quick fix, is what keeps your door working long after we’ve left. If you want to see how we approach the whole trade, start at Sunrise Garage Door Repair Co.
Same-Day Service and Emergencies
A garage door that won’t close is a security issue the moment it happens. We treat those calls as urgent, not a Monday-morning callback. Same-day service is available on most repair and opener calls, and we answer the phone around the clock. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. The price for urgent work is the same as any other job: set per job by the written estimate, no premium tacked on. Call (877) 685-2138 when it can’t wait.
FAQs – Garage Door Cost
How much does garage door repair cost in Broadview Park?
Most garage door repairs in Broadview Park run $150 – $600. A single spring is $180 – $340, opener repair is $120 – $320, and cable repair is $130 – $250. The written estimate sets the final price. Call (877) 685-2138 for an exact quote; estimates are free.
Is it cheaper to repair or replace my garage door?
Repair is cheaper when one part has failed on an otherwise solid door. Replacement is the better value when the repair cost climbs toward the $700 – $2,200 installation range because panels, springs, and hardware are all failing together. We’ll quote both so you can compare. Call (877) 685-2138 for a free estimate.
How much does a new garage door cost in Broadview Park?
A new garage door installed in Broadview Park typically costs $700 – $2,200. The low end is a single-car steel door; the high end is a larger insulated door with windows and upgraded hardware. The written estimate sets the exact price. Call (877) 685-2138 for a free quote.
Can you fix my garage door the same day?
Yes, same-day service is available on most repairs and opener calls in Broadview Park. We answer 24/7, and fast dispatch runs 7am-7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (877) 685-2138 to get on the schedule.
Do you work on my garage door brand?
Yes, we work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, which covers the vast majority of doors and openers in Broadview Park. If your brand is outside that list, call and we’ll tell you straight. Call (877) 685-2138 for an honest answer.
Why does a paired spring cost more than a single spring?
A matched pair costs about twice the single-spring price of $180 – $340 because both springs are replaced together. Springs wear at the same rate, so replacing one and leaving the other is a setup for a second breakdown. Replacing the pair now saves a return visit. Call (877) 685-2138 for a free estimate on a spring replacement.
Do you charge extra for emergency work?
No. Emergency and same-day work is priced the same as any other job, per the written estimate. There’s no premium for a door that fails outside standard hours. We answer 24/7 and dispatch fast from 7am to 7pm, Sunday through Friday. Call (877) 685-2138 when it can’t wait.
Where to Go From Here
Tile roofs, canal-front streets, and older single-story homes make up a lot of Broadview Park, and most of those garages have a door that’s seen plenty of South Florida summers. Whether yours needs a spring, an opener, a panel, or a whole new door, the estimate is free and the price is in writing before we start. Call (877) 685-2138 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
If you want to see the full range of what we handle, our Sunrise Garage Door Repair Co page covers the breadth of our service. For related reading, our guides on garage door spring cost and garage door opener cost break down the two most common repair categories in more detail.
Pricing reflects the Broadview Park market as of 2026. Sunrise Garage Door Repair Co offers free estimates – call (877) 685-2138.
Written by the team at Sunrise Garage Door Repair Co.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Daniela Torres"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Stephanie Brooks"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Tara Bennett