Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Sunrise Homeowners
A garage door that won’t open, won’t close, or hangs crooked turns a normal morning into a problem you have to solve before anything else. In Sunrise, where most homes have an attached garage and the door is the main way in and out, a broken spring or a failed opener stops the whole household. We handle garage door repair for these exact situations, and our technicians have up to 11 years of experience working on the brands that fill this city’s driveways. We answer 24/7, and when the door can’t wait we offer fast dispatch from 7am to 7pm, Sunday through Friday. Same-day repair is often possible, and every price is quoted and agreed before any work starts. Call (877) 685-2138.
What Our Garage Door Repair Service Includes
Six jobs make up most of what we’re called out for in Sunrise. Here’s what each one involves, when you need it, and how we approach it.
Panel Replacement
A single bent or dented panel can throw off the whole door’s balance and let rain and heat into the garage. You need panel replacement when a panel is creased from impact, rusted through at the bottom, or has come loose from its hinges, and the rest of the door is still sound. We match the panel profile to your existing door as closely as the make allows, then check the door’s balance afterward so the new panel doesn’t strain the springs or opener. On Clopay and Amarr doors we can usually source a matching section without replacing the whole door.

Spring Repair
Springs do the heavy lifting on your door, and when one breaks you’ll hear a sharp bang and find the door suddenly too heavy to lift. Torsion and extension springs both wear out with use, and a broken spring is a genuine safety risk if anyone tries to force the door up by hand. We replace springs with the correct size and wire gauge for your door’s weight, then rebalance the door and test the opener’s travel. We treat spring work as a trained-technician job only, because high-tension springs can cause serious injury if handled without the right tools.

Cable Repair
The cables run along each side of the door and work with the springs to keep it level as it travels. A frayed, snapped, or slipped cable shows up as a door that lifts crooked, jerks, or hangs on one side, and it needs attention before it damages the tracks or drops the door unexpectedly. We replace both cables as a matched set when one fails, since the other is usually the same age, and we inspect the drums and bottom brackets while we’re in there. Cables are under the same tension as springs, so this is not a job to attempt yourself.

Track Realignment
Tracks guide the door in a straight line, and even a small bend from a bumped car or a misjudged turn can make the door bind, scrape, or stall halfway. You’ll notice track trouble when the door rubs, shakes, or leaves a gap at one corner, and ignoring it wears out the rollers and opener fast. We straighten or replace the affected sections, check the spacing along the full run, and confirm the door travels smoothly before we call it done.
Roller Replacement
Rollers are the small wheels that carry the door along the tracks, and worn rollers make a door noisy, shaky, or hard for the opener to move. When rollers are flat-spotted, cracked, or squealing, replacing them restores quiet operation and takes strain off the opener motor. We swap rollers on nylon or steel hinges as your door uses, and we check the hinges and bearings at the same time so you’re not paying for a second visit soon after.
Sensor Calibration
The safety sensors at the bottom of the tracks tell the opener to reverse if something is in the door’s path, and when they’re misaligned or dirty the door may refuse to close or close partway and reverse. You need sensor calibration when the door reverses for no visible reason, the opener light flashes, or the door won’t shut at all. We realign the sensors, clean the lenses, check the wiring back to the opener, and test the reversal with a physical obstruction to confirm it’s working the way it should.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Repair
We work on the eight brands that cover most residential doors and openers: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That range matters because a technician who knows your make knows where it tends to wear. On Clopay and Amarr doors, we know the panel profiles and how the sections seat, which helps when a replacement panel needs to match what’s already there. On Wayne Dalton doors, we’re familiar with the torsion systems these doors use and how they behave once a spring lets go.
For openers, we service LiftMaster, Chamberlain, Genie, and Craftsman units and understand how each brand handles travel limits, force settings, and safety reversal. That means fewer guesswork diagnoses and a fix aimed at the actual failure, not a parts swap. Whether you have a Craftsman opener from an older install or a newer LiftMaster unit, we can help, and if your make isn’t one of the eight, call us and we’ll tell you honestly whether we can take it on.
Signs You Need Garage Door Repair Right Now
- The door won’t close all the way. A door that stops short or reverses on its own leaves your home open, and it usually points to a sensor problem or a travel limit that’s drifted. It’s worth fixing before the gap becomes a security issue overnight.
- You heard a loud bang from the garage. That sound is often a torsion spring snapping, and the door will feel far heavier than usual afterward. Stop using the opener until it’s checked, since a door running on a broken spring can damage the opener or come down hard.
- The door is crooked or binds in the tracks. A door that rises unevenly or scrapes on one side usually has a cable, roller, or track problem. Left alone, it wears the opener and can bend the tracks further.
- The opener runs but the door doesn’t move. If you hear the motor but the door stays put, the issue could be a broken spring, a disconnected trolley, or a stripped gear in the opener. This one needs a proper diagnosis rather than repeated button presses.
- The door shakes, squeals, or gets louder each week. Noise and vibration usually mean worn rollers, dry hinges, or loose hardware. It’s a smaller repair now and a bigger one if the opener burns out from the strain.
Our Garage Door Repair Process – Step by Step
- 1
We take your call and get the details. Tell us what the door is doing and what brand it is, and we’ll book a visit with a clear arrival window, not a vague promise. If it’s urgent, we’ll get you the soonest dispatch slot from 7am to 7pm, Sunday through Friday.
- 2
We diagnose on site. The technician checks the door’s balance, springs, cables, tracks, rollers, and opener, and tests the safety reverse. We use a door balance check and manual travel test to see how the door behaves without the opener masking the problem.
- 3
We explain what’s wrong and quote the price. You get a written estimate before anything is touched, with the parts and labor spelled out. The price is agreed before work starts, so there’s no surprise when the invoice arrives.
- 4
We do the repair. Springs, cables, panels, rollers, tracks, and sensors are handled to the manufacturer’s specs for your door’s make and weight. We rebalance and retest the door and opener once the repair is complete.
- 5
We walk you through the result. The technician shows you what was replaced, tests the door with you watching, and answers any questions about keeping it running smoothly. You’ll know the door is safe and working before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Sunrise?
Most garage door repair in Sunrise runs $150 – $600, depending on what failed and how many parts are involved. A typical spring repair runs $180 – $340 for one spring, and a matched pair is usually replaced together, so a pair costs roughly twice that. Cable repair runs $130 – $250, opener repair $120 – $320, panel replacement $250 – $500, track realignment $120 – $240, roller replacement $110 – $220, and sensor calibration falls within the general repair range. If your opener needs replacing rather than repairing, installation runs $250 – $550.
What affects the price is the part that failed, the size and weight of your door, the brand and whether a matching panel or spring has to be sourced, and how many components were damaged by the original failure. A snapped cable that bent a track costs more than a cable alone. To avoid overpaying, get the written estimate before work starts and ask what’s included, since a fair quote covers parts, labor, and a rebalance test. Our estimates are free, and the written estimate sets the final price.
Garage Door Repair Near Sunrise – Our Service Area
We take repair calls across Sunrise and the cities around it, including Tamarac, Lauderhill, Plantation, North Lauderdale, Lauderdale Lakes, Margate, and the neighborhoods of Roosevelt Gardens, Washington Park, Boulevard Gardens, Franklin Park, and Broadview Park. Response times depend on where you are and how busy the day is, and we’ll give you a realistic window when you call rather than an optimistic one. For garage door repair in the neighboring cities, we book the same way.
Serving Sunrise, FL – Our Local Coverage Area
We serve Sunrise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Repair in Sunrise
Garage door repair is the work of diagnosing and fixing the parts that make a door open, close, and secure your home, including springs, cables, panels, tracks, rollers, sensors, and the opener itself. It covers everything from a single worn roller to a snapped torsion spring, and the goal is a door that runs safely and smoothly again. We handle all of it as a dedicated garage door company, not a general handyman service. Call (877) 685-2138 to book a repair.
Most repairs take between one and three hours on site, depending on the part. A roller swap or sensor calibration is usually quick, while spring, cable, or panel replacement takes longer because the door has to be rebalanced and retested afterward. We’ll give you a realistic time estimate when we quote the job, and if a part has to be ordered we’ll tell you before we schedule.
Garage door repair in Sunrise typically runs $150 – $600, with common jobs like spring repair at $180 – $340 for one spring and cable repair at $130 – $250. The final price depends on what failed, your door’s size and brand, and whether a matching part has to be sourced. The written estimate is agreed before any work starts. Call (877) 685-2138 for an exact quote; estimates are free.
Yes, we service Clopay, Amarr, Wayne Dalton, and Craftsman, along with LiftMaster, Chamberlain, Genie, and Raynor. Our technicians know how each of these makes wears and where the common failure points are, so the diagnosis is aimed at the actual problem. If your door is a different make, call and we’ll tell you whether we can help.
Same-day repair is often possible, especially for a door that won’t close or a broken spring. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday; we’re closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (877) 685-2138 and we’ll give you the soonest slot.
We stand behind our work, and the written estimate spells out what’s covered on the parts and labor for your specific repair. Ask the technician to walk you through the coverage before work starts so you know exactly what you’re getting. If something isn’t right after the repair, call us and we’ll make it right. Call (877) 685-2138 with any warranty questions.
Clear the area around the door and the garage floor so the technician has room to work, and move any cars out of the way. If you know the door or opener brand, have that ready, along with a quick description of what the door is doing and when it started. Keep the door closed and don’t run the opener until the technician arrives, especially if you suspect a broken spring. Call (877) 685-2138 to confirm your appointment.
Schedule Your Garage Door Repair Service in Sunrise Today
A door that won’t close or a spring that snapped isn’t something to put off. Call (877) 685-2138 and we’ll book your repair, with same-day service often available and fast dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7. Our technicians have up to 11 years of experience, estimates are free, and the price is agreed before any work starts. You can also reach us through Sunrise Garage Door Repair Co or arrange garage door repair nearby.
Written by the team at Sunrise Garage Door Repair Co.