Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Sunrise?
Garage door repair in Sunrise typically costs $150 to $600, depending on what failed and what parts the job needs. A single broken spring runs $180 to $340, while opener repairs land between $120 and $320. Those are estimated ranges for the local market – the written estimate we give you after we look at the door is what sets the final price.
If your door is stuck open or won’t secure the house, call (877) 685-2138. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Estimates are free, and our technicians have up to 11 years of experience working on residential doors.
Key Takeaways
- Most garage door repair visits in Sunrise fall between $150 and $600.
- Springs are the most common failure and the most dangerous part to touch. One spring costs $180 to $340, and a matched pair is usually replaced together, so a pair runs about twice that.
- Opener problems are cheaper to fix than most homeowners expect: $120 to $320 for repair, $250 to $550 to replace the unit.
- A door that won’t close is a security problem, not a weekend project. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment.
Garage Door Repair Cost Breakdown (2026)
Here’s how the typical repair categories price out in Sunrise this year. Treat these as estimated ranges for planning – every job gets its own written estimate before any work starts.
| Repair Type | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
What pushes a bill toward the top of a range? A torsion spring job on a heavy double door takes more hardware and more time than a single-car door. A bent track, a cracked panel, and a failed opener on the same door add up. What keeps it low? Catching a worn roller or a loose cable before it takes the door out of alignment. A $110 roller set today is a lot cheaper than a cable, track, and panel job later.
One thing to know before you compare quotes: the spring range above covers one spring. Springs wear in pairs, and when one breaks the other usually has the same mileage on it, so most technicians recommend replacing both. A matched pair costs about twice the single-spring range. We’ll tell you which option makes sense for your door and put it in writing.
What Affects Garage Door Repair Pricing in Sunrise
- Door size and weight. A single-car door and a double-car door carry different spring loads. Heavier doors need heavier-gauge springs and more careful tensioning, and that shows up in labor time.
- Spring type. Torsion springs (the horizontal kind mounted above the door) take longer to replace safely than extension springs (the ones running along the sides). Most newer Sunrise homes have torsion setups.
- Brand and part availability. We service the eight most common residential brands – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor – so your equipment is rarely the reason a job gets quoted higher. Off-list or discontinued hardware can mean a longer parts search.
- How many things failed at once. A single broken spring is one job. A snapped cable that whipped the door and bent a track is three. The longer a problem runs, the more it drags neighbors into the repair.
- Whether the door is safe to operate. If a panel is cracked or a hinge has pulled loose, we fix the structure first. Running an opener on a compromised door grinds the opener and the door against each other, and you end up paying for both.
- Repair versus replace. A 12-year-old door with a bent track and two cracked panels is often a candidate for replacement at $700 to $2,200 rather than a string of repairs. We’ll lay out both paths so you can decide.
Sunrise’s climate plays a quieter role than most homeowners realize. The heat and humidity here work on lubricant, seals, and wood or composite panels year-round, and a door that sits in full afternoon sun all day will dry out its rollers and weatherstripping faster than one under a carport or shade tree. That’s why we see a lot of stiff, noisy doors in the middle of summer – the hardware isn’t broken, it’s just dry. A proper lubrication and adjustment visit is one of the cheapest calls we make, and it heads off bigger bills later.
Home age matters too. Sunrise has a wide spread of housing stock, from mid-century neighborhoods to newer construction in the western part of the city, and the garage hardware tends to match the era of the house. An older door may still be running its original opener and extension springs, while a newer one has a belt-drive unit and a torsion system. The repair approach and the parts aren’t the same for both.
How to Save on Garage Door Repair
There’s no trick to a lower bill – there’s just catching problems early and knowing what you’re paying for. A few habits that pay off:
- Listen before you look. A door that’s gotten louder or started to shudder is telling you something. A grinding or popping sound often means a worn roller or a cable starting to fray, and fixing that early stays in the $110 to $250 range instead of turning into a track and panel job.
- Stop running a broken door. If a spring has snapped or the door is crooked, don’t keep hitting the opener. You’ll burn out the motor on a heavy door and add an opener repair ($120 to $320) to a spring repair you already needed.
- Lubricate the moving parts a couple of times a year. Rollers, hinges, and tracks benefit from a proper garage door lubricant. It’s the cheapest maintenance there is, and in Sunrise’s heat and humidity it matters more than in a drier climate.
- Ask for the written estimate before work starts. A fair price is a stated price. Our estimates are free, and we quote per job in writing so there’s no surprise on the invoice.
- Fix the cause, not just the symptom. A door that keeps going out of alignment usually has a bent track or a worn cable behind it. We look for the root problem so you’re not calling us back for the same thing next month.
Call (877) 685-2138 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, means we can often get eyes on the door and a written quote to you the same day.
Repair or Replace? A Quick Way to Decide
Repair usually wins when the door itself is sound – the panels are straight, the tracks are true, and the problem is a component like a spring, cable, roller, or opener. Those are the $110 to $550 jobs, and a repaired door can run for years more.
Replacement makes more sense when the structure is failing: multiple cracked or rusted-through panels, a track that’s bent beyond realignment, or a door that’s just plain unsafe to lift. New installation runs $700 to $2,200, and for a badly compromised door that’s often the more honest number. We’ll walk you through both so the decision is yours, not ours.
Why Brand Matters When You Book a Repair
Garage doors and openers aren’t universal. A technician who works on the same eight brands every week knows the quirks that a general handyman doesn’t – the travel-limit calibration on a particular opener, the way one manufacturer’s panels seat, the spring sizing that matches a given door weight. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment, which covers the vast majority of residential doors in Sunrise. That’s a dedicated focus, not a side job between other trades.
Our technicians have up to 11 years of experience with residential garage door systems, and springs are a core part of what we do – not an occasional request. It’s also the part of the job where experience matters most. A torsion spring under tension holds enough stored energy to cause serious injury if it’s released wrong, and the cables and brackets around it are just as unforgiving. That’s a job for a trained technician, full stop. If your spring has broken, keep people clear of the door and call us instead of going at it with hand tools.
When the Door Can’t Wait
A broken spring, a failed opener, or a door that won’t close leaves your home open. That’s why emergency service isn’t an add-on for us – it’s part of what we do. If your door fails and you can’t leave it, call (877) 685-2138. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. The price is set per job by the written estimate either way, so urgent timing doesn’t change what you’re quoted.
Fast Answers: Garage Door Repair Cost in Sunrise
How much does garage door repair cost in Sunrise?
Garage door repair in Sunrise typically costs $150 to $600, with most common failures – springs, cables, openers, rollers – landing well inside that range. The exact price depends on the part, the door, and how many things need fixing. Call (877) 685-2138 for a free estimate – it’s the fastest way to get a real number for your door.
How much does a broken spring cost to fix in Sunrise?
One spring costs $180 to $340. Since springs are usually replaced in matched pairs, a pair runs about twice that. This is the most safety-critical repair on the door, so it’s worth doing right the first time. Call (877) 685-2138 and we’ll quote your door specifically – estimates are free.
Is it cheaper to repair or replace a garage door?
Repair is usually cheaper – most fixes fall in the $110 to $550 range, while a new door installation runs $700 to $2,200. Replacement only makes financial sense when the door’s structure is failing, like bent tracks or multiple cracked panels. When in doubt, get it looked at. Call (877) 685-2138 for a free estimate and we’ll tell you which path makes sense.
Can you come today?
Often, yes. We offer same-day service, with fast dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7, so if you’re reading this outside dispatch hours, a call is still booked into the next opening. Call (877) 685-2138 and we’ll get you on the schedule.
Do you charge for an estimate?
No – estimates are free, and the price you see in the written estimate is the price for the job. We don’t quote over the phone and then change the number on site. Call (877) 685-2138 to book yours – we answer 24/7.
Getting a Straight Number for Your Door
Every garage door failure is a little different, and the only number that means anything is the one written for your door. Until then, use these ranges to plan: $150 to $600 for most repairs, $110 to $250 for the smaller component fixes, and $250 to $550 when the opener is the problem. Whatever the job, we come out, take a look, and put the price in writing before we pick up a tool.
When your door won’t open, won’t close, or won’t stop making that noise, call (877) 685-2138 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. As the team at Sunrise Garage Door Repair Co, we work on your brand, we get you back up and running, and we aim for the right fix, not just a quick one.
Pricing reflects the Sunrise market as of 2026. Sunrise Garage Door Repair Co offers free estimates – call (877) 685-2138.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Daniela Torres"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Stephanie Brooks"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Tara Bennett