Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Sunrise?
Panel replacement in Sunrise typically costs $250 – $500 for a standard residential door section. That covers the new panel, the labor to fit and balance it, and a safety check of the springs, cables, and tracks once the section is back in place. A single damaged bottom section on a double door sits near the low end; a custom-width or discontinued-profile top section on a premium door floats toward $500. The written estimate sets the final price.
We’re Sunrise Garage Door Repair Co, and panel work is one of the five things we do all day. We handle LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment, so when a dented or cracked section needs replacing, the real question is usually whether the matching profile is still available – not whether the door can be fixed. Call (877) 685-2138 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Panel Replacement Cost Breakdown (2026)
Here’s how the money lands on a typical panel job in Sunrise. Every number below is a typical estimated range for this market, not a quote. The estimate you receive in writing is what you pay.
| Line item | Typical estimated range |
|---|---|
| Single standard panel (one section) | $250 – $500 |
| Two panels replaced on the same visit | $450 – $900 |
| Bottom section (the one that takes the hits) | $270 – $520 |
| Custom or discontinued-profile panel | $400 – $750 |
| Panel plus track realignment | $120 – $240 (added) |
| Panel plus spring repair | $180 – $340 (one spring) |
| Panel plus roller replacement | $110 – $220 (added) |
| Full door replacement (when panels aren’t worth it) | $700 – $2,200 |
What pushes a panel job up? Section count and size first – a double-car door has wider, heavier sections, and freight on an oversized panel costs more. Profile availability is the second lever: if your door’s model is still in production, the panel arrives quickly and the price stays near the middle of the range. If it’s been discontinued, we have to source a match or rebuild the look, and that’s where a job climbs toward $750. Third is what the panel dragged with it. A hard strike against a bottom section often bends a track or stretches a cable, and you’ll see that cost as a line item. What pushes it down? Replacing one bottom panel instead of two, and catching the damage before it rusts into the framing.
What Affects Panel Replacement Pricing in Sunrise
Sunrise homes come in a few flavors – ranch-style single-family houses, townhome clusters, and plenty of 55-and-over communities where the doors are original to the build. That mix shapes what a panel job costs here.
- Door brand and model availability. We service eight major brands, and the difference between a Clopay panel still in production and a Wayne Dalton profile that’s been retired is hundreds of dollars and several days of waiting. Knowing your brand and model number before you call gets you a tighter estimate on the first pass.
- One panel or several. A single bottom section replacement runs $250 – $500. Two sections on the same visit usually land around $450 – $900 because the setup, balancing, and safety check are shared. Asking for a panel-by-panel estimate helps you decide whether to fix the worst one now and the second one later.
- The Sunrise sun and summer storms. UV exposure and heat age the finish on south- and west-facing doors faster than you’d expect, and afternoon thunderstorms send debris and palm fronds into bottom sections. When a panel is faded or storm-dinged rather than crushed, the choice between replacing and refinishing comes down to how deep the damage goes.
- What the impact bent underneath. A panel alone is the simple case. If a car tapped the door or a storm threw something at it, the tracks, rollers, or cables often took part of the hit. Track realignment adds $120 – $240; roller replacement adds $110 – $220.
- Insulation and window inserts. Insulated panels and sections with built-in windows cost more than plain steel, and window inserts sometimes have to be swapped over from the old section rather than bought new.
- How urgent it is. A panel that’s come loose and left a gap in your door is a security problem, not a cosmetic one. Same-day and emergency work is priced per job by the written estimate like everything else – we don’t inflate the line because you called on a Sunday. The estimate is free either way.
If the section is beyond a cosmetic fix, it’s worth reading our guide to panel replacement before you decide between repairing and replacing the whole door.
How to Save on Panel Replacement
Panel work is one of the easier garage door jobs to keep on budget, because you’re replacing a section rather than rebuilding a system. A few habits that keep Sunrise homeowners out of the high end of the range:
- Fix the panel before the frame. A dented bottom section that’s left alone traps water and dirt against the door’s lower frame. Catching it early keeps the job at panel-only pricing instead of panel-plus-track.
- Know your model number. It’s usually on a sticker inside the door or on the opener housing. Having it ready means we can tell you whether the matching profile exists and what it costs without a second visit.
- Ask about same-visit bundling. If a spring is also tired, replacing it during a panel job shares the setup labor. Spring repair runs $180 – $340 for one spring – and if both springs are the same age, they’re usually replaced as a pair at about twice that.
- Get the free estimate in writing. A written estimate that names the panel, the labor, and any track or roller work is how you compare two quotes honestly. Call (877) 685-2138 for yours – there’s no charge for it.
- Don’t skip the safety check. Springs and cables on a garage door hold serious tension and can fail without warning. Never try to loosen or adjust them yourself – that’s a trained-technician job. A quick check during a panel visit catches a spring that’s about to go.
When a panel repair starts approaching half the price of a new door, replacement often wins on value. New door installation runs $700 – $2,200 in Sunrise, and our guide to garage door repair lays out how to tell the difference.
Why Sunrise Homeowners Call Us for Panel Work
A panel replacement is straightforward when the technician knows your brand and has the right profile. It’s a headache when a generalist guesses. We’re a dedicated garage door company – not a handyman service splitting attention across trades – and our technicians have up to 11 years of experience on residential doors and openers. We work on your brand, whether that’s LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, or Raynor.
Springs are the part that worries most homeowners, and they should. They hold the door’s full weight under tension and a failed spring can send a door down hard. We treat spring repair as a core service rather than an add-on, and we check them on every panel job. If a spring is failing too, it’s better to know before you’re stuck with a door that won’t open. The same goes for openers – if your door’s been sluggish, our garage door opener repair team can look at it the same visit.
And when it can’t wait – a panel knocked loose in a storm, a door that won’t secure the house – we offer emergency garage door service. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Back up and running is the goal.
FAQs – Panel Replacement Cost
How much does garage door panel replacement cost in Sunrise?
Panel replacement in Sunrise typically costs $250 – $500 for a single standard section, including labor and a safety check. Two panels on the same visit usually run $450 – $900. Custom or discontinued profiles can reach $750. Call (877) 685-2138 for a free written estimate.
Can I replace just one panel instead of the whole door?
Yes – replacing a single damaged section starts around $250 and is almost always the right call when the rest of the door is sound. You only move toward a full replacement (at $700 – $2,200) when panels are no longer available, or when several sections and the hardware are worn out together. Call (877) 685-2138 and we’ll tell you which makes sense for your door.
Is it cheaper to repair or replace a damaged garage door panel?
Repairing a single panel is far cheaper than a new door – $250 – $500 versus $700 – $2,200. The tipping point comes when two or more sections plus track and springs need work, because the combined repair cost can approach replacement. A written estimate on both options tells you exactly where you stand. Call (877) 685-2138 for yours.
Can you come today for a loose or broken panel?
Same-day panel service is often possible in Sunrise, and a panel that’s come loose is treated as a priority because it leaves your door exposed. Call (877) 685-2138. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Does replacing a panel affect my garage door springs or opener?
Sometimes. Swapping a section changes the door’s weight, so the springs and opener get rebalanced and tested afterward – that’s included in the panel estimate. If a spring turns out to be worn, spring repair runs $180 – $340 for one spring, and a matched pair costs about twice that. Call (877) 685-2138 to book a free look.
Get Your Free Panel Replacement Estimate
Whether it’s a single cracked bottom section or a whole door full of storm damage, we’ll give you a straight answer and a written estimate at no charge. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors and openers, so you won’t be turned away because of your equipment. Call Sunrise Garage Door Repair Co at (877) 685-2138 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The right fix, not just a quick fix – and back to your routine.
Pricing reflects the Sunrise market as of 2026. Sunrise Garage Door Repair Co offers free estimates – call (877) 685-2138.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Daniela Torres"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Stephanie Brooks"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Tara Bennett