Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Opener Repair for Sunrise Homeowners
When the opener hums but nothing moves, or the door won’t close on the way out, the whole day tilts. You’re stuck waiting, or worse, you leave the house unsecured. That’s the exact problem we’re built for: getting a stopped garage door in Sunrise working again, usually the same day. Our technicians have up to 11 years of experience, and we work on the equipment you already own instead of quoting you a whole new system. A strong local reputation matters to us because it’s how neighbors find us. Call (877) 685-2138. We answer 24/7, and same-day repair is often possible with fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Garage Door Opener Repair Service Includes
An opener isn’t one part. It’s a motor, a logic board, a drive rail or belt, a photo-eye safety system, and the accessories that tie it all together. Most calls we get are about one of those pieces failing, not the whole unit. Here’s what we handle under each heading, from a single failed part to a full swap to a smarter setup.
Opener Repair
Most opener failures trace back to something smaller than the motor: a worn drive gear, a stripped belt, a burned-out capacitor, a logic board that won’t respond, or a safety eye knocked out of alignment. Repairing the actual fault is usually far less expensive than replacing a unit that has plenty of life left. We diagnose with a multimeter and a force-adjustment check before we recommend anything, then replace only the failed component and re-test the door’s balance and travel limits.

Opener Installation
When an opener is beyond safe repair, or a home gets a heavier door than the old motor was rated for, installation is the next step. We match the opener to the door’s weight and the ceiling height in the garage, then set the travel limits and force settings exactly so the safety reverse works the way it should. This is measured and scheduled work, not a same-day drop-in. Once it’s mounted, we run the door through a full open and close cycle with you watching, and you leave knowing how the emergency release works.

Smart Opener Upgrade
An older opener can often be brought into the phone era with a smart controller that lets you open, close, and check the door from anywhere. This makes sense if you want to let a delivery inside or confirm the door is shut after you’ve already left, without changing the motor itself. We confirm your current opener is compatible, wire the controller to your home network, and walk you through the app before we leave. It’s a small upgrade that removes a lot of the “did I close it?” anxiety from a typical Sunrise morning.

Keypad Entry
A keypad lets family members in without a remote or a key, and it’s a common fix when the code stops working or the buttons go unresponsive. We can replace a dead keypad, reprogram a unit that’s locked out, or add one to a setup that never had it. Battery contacts and weather exposure are the usual suspects on a keypad that suddenly ignores the code.
Remote Programming
Remotes drift out of sync, or a new one arrives and won’t talk to the opener. Programming a remote clears up most “the clicker stopped working” calls, and it’s a good time to wipe old codes from a unit that passed through other hands. We program your remotes, add a fresh one, and check that the wall switch and outdoor keypad are on the same system. This one is quick, and it’s worth having done right so a lost remote doesn’t turn into a security worry.
Battery Backup
A battery backup keeps the opener working through a power outage, which matters during South Florida’s storm season when the grid can drop without warning. These are standard on many newer openers and can be added to older ones that support them. We check the backup battery, replace one that has lost its charge, and confirm it will actually carry the door when the power goes out. A backup that’s never been tested is easy to assume is fine when it isn’t.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Opener Repair
LiftMaster and Chamberlain units make up a big share of what we see in Sunrise, and we know their logic board failures, gear wear, and safety-eye quirks well enough to diagnose them fast. Genie and Craftsman openers show up next most often, and each has its own habits: Genie’s older screw-drive models wear differently than a belt unit, and Craftsman equipment, which is built on Chamberlain’s platform, shares many of the same repair paths. We handle the doors that go with them too, including Clopay and Amarr panels, and Wayne Dalton doors that use their own torsion system.
The point is that a failed opener shouldn’t send you hunting for a specialist in a single brand. Whether you have LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, or Raynor equipment, we can help. No customer gets turned away because of what they bought.
Signs You Need Garage Door Opener Repair Right Now
Not every symptom means a new opener. Most of these point to a specific part that can be fixed. But each one left alone tends to get worse, and a couple of them are a genuine safety concern.
- The door won’t close and the light flashes. That flash is usually the safety eye reporting an obstruction or a misalignment, not a dead motor. It’s the most common reason a door reverses before it hits the floor, and it’s almost always a quick fix once we trace where the signal is breaking.
- The motor runs but the door doesn’t move. You hear the opener working and see the door sitting still. This usually means a stripped gear, a broken belt, or a drive that’s disengaged from the carriage, and it will not sort itself out.
- Loud grinding, banging, or a shudder on the way up. A healthy opener is quiet. Grinding points to worn gears; a shudder can be the door itself out of balance and fighting the motor. That extra strain wears the opener out faster every cycle.
- The remote or wall switch works intermittently. A signal that comes and goes can be a failing logic board, a dying remote battery, or an antenna issue. It’s worth checking before you rely on a door that opens only sometimes.
- The door reverses or stops for no clear reason. This is a safety feature working, but the force limits may be set too tight or the travel limits have drifted. We reset them to spec and confirm the safety reverse functions correctly.
Our Garage Door Opener Repair Process – Step by Step
Every job follows the same path, so you know what happens and what it costs before anyone touches a part.
- 1
We listen and set a time. You tell us what the door is doing, and we book the visit. For an opener that won’t secure the house, we treat it as urgent and aim for same-day service where the schedule allows.
- 2
We inspect the whole system, not just the opener. A failed opener can be a symptom of a door that’s out of balance or a spring that’s given out. We check the door’s balance first, because replacing an opener over a spring problem wastes your money.
- 3
We diagnose with real tools. A multimeter checks the electrical side; a force and travel check tests the safety reverse; a visual pass looks at gears, belt, carriage, and safety eyes. We show you what we find.
- 4
You get a written estimate before any work starts. The price is quoted and agreed before we pick up a tool, and the written estimate sets the final price. No surprise invoice at the end.
- 5
We repair, test, and clean up. We replace the failed part, run the door through a full cycle, and confirm the safety reverse and balance are right. Then we walk you through what we did and how to keep it running.
One safety note worth stating plainly: the opener’s motor and wiring are not a DIY project, and any repair that puts you near the electrical components or the door’s springs should go to a trained technician. We’d rather you call than risk a hand or a fall.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Opener Repair Cost in Sunrise?
Opener repair in Sunrise typically runs $120 – $320, depending on the part that failed and how accessible the unit is. A simple remote reprogram or a safety-eye realignment sits at the low end. A failed logic board, a stripped drive gear, or a capacitor replacement pushes toward the middle and top of that range. Here’s how the common scenarios break down.
| Job | Typical Estimated Range |
|---|---|
| Opener repair (diagnose and fix a failed part) | $120 – $320 |
| Opener installation (full replacement) | $250 – $550 |
| Garage door repair (door and opener together) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
A few things move the number. The brand and model of your opener matters, since some parts are easier to source than others. Whether it’s a belt, screw, or chain drive affects labor. And if the door itself is out of balance, we fix that first, because an opener working against a heavy door will keep failing. To avoid overpaying, get a written estimate that names the failed part and the price before work begins. Our estimate is free and includes the diagnosis, so you’re not guessing.
One thing worth flagging on pricing: a spring range above is for one spring, and matched springs are usually replaced together, so a pair runs about twice that. When the estimate sets the price, the final number is the one on the paper. Call (877) 685-2138 for an exact quote. Estimates are free.
Garage Door Opener Repair Near Sunrise – Our Service Area
We take opener repair calls across Sunrise and the neighborhoods around it, from Plantation and Tamarac to Lauderhill, North Lauderdale, and Margate. We also reach Lauderdale Lakes and the smaller communities nearby, including Roosevelt Gardens, Washington Park, Boulevard Gardens, Franklin Park, and Broadview Park. Our teams aim for a fast response, with same-day service where the schedule allows and fast dispatch from 7am to 7pm, Sunday through Friday. If you’re just outside these areas, call and we’ll tell you honestly whether we can get to you. For a broader look at what we do, see our main page at Sunrise Garage Door Repair Co.
Serving Sunrise, FL – Our Local Coverage Area
We serve Sunrise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Opener Repair in Sunrise
Garage door opener repair is fixing the motor, board, drive, or safety system that raises and lowers your door, instead of replacing the whole opener. It covers things like a stripped gear, a dead logic board, a misaligned safety eye, or a remote that won’t pair. We diagnose the actual failed part and replace only what’s needed. Call (877) 685-2138 for a free estimate.
Most opener repairs take about an hour to an hour and a half once we’re on site. A remote reprogram or safety-eye fix can be quicker, while a logic board or gear replacement takes longer. We give you a time estimate when we diagnose, so you know how long you’re without the door. Call (877) 685-2138 to book a visit.
Opener repair in Sunrise typically runs $120 – $320, depending on the failed part and the model. A full opener installation, if repair isn’t the right call, runs $250 – $550. The written estimate sets the final price, and the price is agreed before any work starts. Call (877) 685-2138 for an exact quote. Estimates are free.
Yes, we service LiftMaster and Chamberlain openers, along with Genie, Craftsman, and the doors they operate. Those two brands share a lot of platforms, so the repair path is often similar. We also handle Clopay, Amarr, Wayne Dalton, and Raynor equipment. Whatever brand you have, we can help.
Same-day service is often possible, so call and we’ll tell you what we can do for your schedule. We answer 24/7, and crews are sent with fast dispatch from 7am to 7pm, Sunday through Friday, with Saturdays closed. A call outside dispatch hours is booked into the next opening. Call (877) 685-2138.
We stand behind our work, and the warranty terms are explained in writing along with your estimate before any work starts. You’ll know exactly what’s covered and for how long before we begin. If something isn’t right after the repair, call us and we’ll make it right. Call (877) 685-2138 for details.
Clear the floor around the door and the opener’s path so a technician can work safely, and have the remotes and keypad handy if those are part of the issue. Note what the door does and when, since the symptom pattern saves diagnosis time. If the opener is accessible from the garage floor, say so when you book. Call (877) 685-2138 to schedule.
Schedule Your Garage Door Opener Repair Service in Sunrise Today
An opener that’s failing won’t fix itself, and a door that won’t close leaves your home exposed. Call (877) 685-2138. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 11 years of experience, and the estimate is free with no obligation. The price is quoted and agreed before any work starts. For related needs, our garage door opener repair service and nearby garage door opener repair and garage door opener repair teams are ready when it can’t wait.
Written by the team at Sunrise Garage Door Repair Co.